TableofContents_DG
1.0 How To Use the Design Guide
2.0 Control System Design Process
3.0 Selection and Installation of Control and Monitoring Points
    3.1. Introduction
    3.2. Point Selection
    3.3. Sensor Accuracy
    3.4. Installation Guidelines
       3.4.1. Safety Points
       3.4.2. Manual Override
       3.4.3. Calibration Test Ports
       3.4.4. Calibrating Analog Inputs
       3.4.5. Calibrating Analog Outputs
       3.4.6. Calibrating Binary Inputs and Outputs
    3.5. Sensor Selection and Installation Guidelines
    3.6. Point Structure and Interface at the BAS
4.0 System Configurations