TableofContents_DG
1.0 How To Use the Design Guide
2.0 Control System Design Process
3.0 Selection and Installation of Control and Monitoring Points
    3.1. Introduction
    3.2. Point Selection
       3.2.1. Temperature Between Each Cooling or Heating Element
       3.2.2. Motor Command Signal and the Motor Status
       3.2.3. Control Loop Execution Over the Network
       3.2.4. Network Card to Obtain Monitoring Points
       3.2.5. Monitoring and Diagnostic Points
       3.2.6. Additional Points for Advanced Control Strategies
    3.3. Sensor Accuracy
    3.4. Installation Guidelines
    3.5. Sensor Selection and Installation Guidelines
    3.6. Point Structure and Interface at the BAS
4.0 System Configurations